Viscous Electronic Material Silver Paste for High Performance Touch Screen Solutions

• Customization: Available
• CAS No.: 7440-22-4
• Place of Origin: Guangdong, China
• Model NO.: LX-K706
• Usage: Touch Screen
• Transport Package: Carton
• Specification: 1kg/can
• Trademark: Longxin
• Origin: China
• Production Capacity: 100kg/Day

Product Description

Product Description

 

Product Parameters

 

100 - 499 grams: $1.01 500 - 999 grams: $0.98 ≥ 1000 grams: $0.95 Variations: Total options: 1 Color.

Model	LX-K706
Solid content%	73.0±1.0
Viscosity (dPa.s)	500±100
Finenessμm	≤10
Square resistance(mΩ/sq/mil)	≤25
Application	Capacitive screen
Curing conditions	ITO FILM: 135*50 minITO GLASS: 150*50 min
Process recommendation	Screen printing, polyester mesh or stainless steel mesh (420 mesh)

 

 

Packaging & Shipping

 

At this moment, shipping solutions for the chosen quantity are unavailable.

Our Advantages

 

Protections for this product: Secure payments: Enjoy peace of mind with every transaction on , protected by stringent SSL encryption and PCI DSS data protection protocols. Easy Return & Refund: Experience hassle-free refunds in cases of order discrepancies or product issues. Benefit from free local returns for defects on eligible purchases. safeguards all orders placed and paid for on the platform, ensuring a trustworthy shopping experience.

Company Profile

 

Foshan Longxin New Material Co., Ltd.

 

FAQ

 

Q: How many days is the price valid for?
A: The price is valid for one day due to daily fluctuations in silver price. Please consult the salesperson for the exact price.

Q: How should the conductive paste be stored?
A: a. Short-term storage. Seal and place at room temperature within 3-5 days.
b. For long-term storage, sintering slurry (sintering temperature above 400°C) can be stored at room temperature below 25°C, and stored in a refrigerator when the room temperature is higher than 25°C.
c. Quick-drying slurry and low-temperature curing slurry (below 200°C) can be stored in a refrigerator at 5~15°C.
d. Regardless any type of slurry, remember to seal it during storage.

Q: What are the precautions before using conductive paste?
A: a. Take it out half a day in advance to warm it up or preheat it in a ventilated oven at 25~30°C for 20 minutes.
b. Do not open it before it returns to room temperature to prevent water vapor from cooling into the paste.

Q: What should be paid attention to when using the conductive paste?
A: a. Make sure the paste is consistent with the ambient temperature.
b. Stir it thoroughly before use to restore the performance of the paste.

Q: Do we need to add diluent when using conductive paste?
A: a. Generally, the viscosity of the paste is adjusted before leaving the factory, so it can be used directly after fully stirring without adding diluent.
b. If it is necessary to add due to the process, such as increasing fluidity, spraying process, etc., add small amounts gradually and stir thoroughly. Do not add too much at one time.
c. Please use special diluents and do not mix them to cause performance changes.