Price Tiers: For 100 - 499 grams, experience unbeatable value at just $1.08 per gram. Opt for 500 - 999 grams and enjoy a reduced rate of $1.05 per gram. For bulk orders of 1000 grams or more, benefit from our lowest price of $1.02 per gram.
|
|
|
|
|
|
|
|
|
|
|
|
Square resistance(mΩ/sq/mil)
|
|
|
|
|
|
|
ITO FILM: 135*50 minITO GLASS: 150*50 min
|
|
|
Screen printing, polyester mesh or stainless steel mesh (250 mesh)
|
Currently, specific shipping solutions are not available for the selected quantity. Please contact us for tailored shipping options.
Protections for this product: Enjoy Secure Payments on , safeguarded with advanced SSL encryption and PCI DSS data protection. Take advantage of our Easy Return & Refund policy, ensuring peace of mind if your order is incomplete or arrives with defects. Plus, benefit from free local returns for qualifying purchases. guarantees the safety of all orders placed and paid on the platform.
Foshan Longxin New Material Co., Ltd.
Q: How many days is the price valid for?
A: The price is valid for one day due to daily fluctuations in silver price. Please consult the salesperson for the exact price.
Q: How should the conductive paste be stored?
A: a. Short-term storage. Seal and place at room temperature within 3-5 days.
b. For long-term storage, sintering slurry (sintering temperature above 400°C) can be stored at room temperature below 25°C, and stored in a refrigerator when the room temperature is higher than 25°C.
c. Quick-drying slurry and low-temperature curing slurry (below 200°C) can be stored in a refrigerator at 5~15°C.
d. Regardless any type of slurry, remember to seal it during storage.
Q: What are the precautions before using conductive paste?
A: a. Take it out half a day in advance to warm it up or preheat it in a ventilated oven at 25~30°C for 20 minutes.
b. Do not open it before it returns to room temperature to prevent water vapor from cooling into the paste.
Q: What should be paid attention to when using the conductive paste?
A: a. Make sure the paste is consistent with the ambient temperature.
b. Stir it thoroughly before use to restore the performance of the paste.
Q: Do we need to add diluent when using conductive paste?
A: a. Generally, the viscosity of the paste is adjusted before leaving the factory, so it can be used directly after fully stirring without adding diluent
b. If it is necessary to add due to the process, such as increasing fluidity, spraying process, etc., add small amounts gradually and stir thoroughly. Do not add too much at one time.
c. Please use special diluents and do not mix them to cause performance changes.
Audited Supplier 
){kind=link}