Nickel Inner Electrode Paste for Mlcc with Superior Bonding Strength

• Customization: Available
• Other Names: Nickel Inner Electrode Paste
• Place of Origin: Guangdong, China
• Model NO.: LX-NJ0080
• Purity: 55.0+-1.0%
• CAS No.: 7440-02-0
• Transport Package: Carton
• Specification: 1kg/can
• Trademark: Longxin
• Origin: China
• Production Capacity: 100kg/Day

Product Description

Product Description

 

Product Parameters

 

Model	LX-NJ0080
Powder particlesizenm	300
Solid content%	55.0±1.0
Viscosity (Pa.s)	812
Sintering temperature()	1250±150
Medium Type	X7RX5R

 

Quantity: 100 - 499 grams, Price: $0.23 Quantity: 500 - 999 grams, Price: $0.20 Quantity: >= 1000 grams, Price: $0.17 Protections: Rest assured with our secure payment processing featuring SSL encryption and PCI DSS data protection standards. Benefit from our Easy Return & Refund policy for any missing or defective orders, ensuring peace of mind with every purchase.

Packaging & Shipping

 

Currently, shipping solutions for the selected quantity are unavailable. Please check back later for updates on our comprehensive shipping options tailored to meet your needs.

Company Profile

 

Foshan Longxin New Material Co., Ltd.

FAQ

 

Q: How many days is the price valid for?
A: The price is valid for one day due to daily fluctuations in silver price. Please consult the salesperson for the exact price.

Q: How should the conductive paste be stored?
A: a. Short-term storage. Seal and place at room temperature within 3-5 days.
b. For long-term storage, sintering slurry (sintering temperature above 400°C) can be stored at room temperature below 25°C, and stored in a refrigerator when the room temperature is higher than 25°C.
c. Quick-drying slurry and low-temperature curing slurry (below 200°C) can be stored in a refrigerator at 5~15°C.
d. Regardless any type of slurry, remember to seal it during storage.

Q: What are the precautions before using conductive paste?
A: a. Take it out half a day in advance to warm it up or preheat it in a ventilated oven at 25~30°C for 20 minutes.
b. Do not open it before it returns to room temperature to prevent water vapor from cooling into the paste.

Q: What should be paid attention to when using the conductive paste?
A: a. Make sure the paste is consistent with the ambient temperature.
b. Stir it thoroughly before use to restore the performance of the paste.

Q: Do we need to add diluent when using conductive paste?
A: a. Generally, the viscosity of the paste is adjusted before leaving the factory, so it can be used directly after fully stirring without adding diluent
b. If it is necessary to add due to the process, such as increasing fluidity, spraying process, etc., add small amounts gradually and stir thoroughly. Do not add too much at one time.
c. Please use special diluents and do not mix them to cause performance changes.