Superior Dispersibility Silver Nanoparticles Powder for Solar Cell Conductor Pastes

• Customization: Available
• Application: Sintering Conductor Pastes
• Shape: Powder
• Model NO.: LX-RF06A
• Material: Silver
• Chemical Composition: Silver
• Transport Package: Plastic Bucket
• Specification: 20-25kg/bucket
• Trademark: Longxin
• Origin: China
• Production Capacity: 100kg/Day

Product Description

Product Description

 

Product Parameters

 

Model	ZRBY-01
Application Areas	Photovoltaic cell back electrode silver paste, ceramic metallization paste and other sintering conductor pastes
Average particle size (μm)	0.45-0.80
Bulk density (g/cm³ )	1.30-2.50
Tap density (g/cm³ )	3.50-5.00
Specific surface area m²/g	0.90-1.90

 

 

Packaging & Shipping

 

Currently, shipping solutions tailored for your selected quantity are not readily available. Rest assured, the total shipping cost is flexible and open for negotiation to best suit your needs.

Our Advantages

 

Protections for this Product: Enjoy secure payments with every transaction on , fortified by stringent SSL encryption and PCI DSS data protection protocols. Benefit from MIC's standard refund policy: easily claim a refund if your order doesn't ship, if items are missing, or if they arrive with product issues. Be assured that every order placed and paid for on the platform is protected by .

Company Profile

 

Foshan Longxin New Material Co., Ltd.

FAQ

 

Q: How many days is the price valid for?
A: The price is valid for one day due to daily fluctuations in silver price. Please consult the salesperson for the exact price.

Q: How should the conductive paste be stored?
A: a. Short-term storage. Seal and place at room temperature within 3-5 days.
b. For long-term storage, sintering slurry (sintering temperature above 400°C) can be stored at room temperature below 25°C, and stored in a refrigerator when the room temperature is higher than 25°C.
c. Quick-drying slurry and low-temperature curing slurry (below 200°C) can be stored in a refrigerator at 5~15°C.
d. Regardless any type of slurry, remember to seal it during storage.

Q: What are the precautions before using conductive paste?
A: a. Take it out half a day in advance to warm it up or preheat it in a ventilated oven at 25~30°C for 20 minutes.
b. Do not open it before it returns to room temperature to prevent water vapor from cooling into the paste.

Q: What should be paid attention to when using the conductive paste?
A: a. Make sure the paste is consistent with the ambient temperature.
b. Stir it thoroughly before use to restore the performance of the paste.

Q: Do we need to add diluent when using conductive paste?
A: a. Generally, the viscosity of the paste is adjusted before leaving the factory, so it can be used directly after fully stirring without adding diluent.
b. If it is necessary to add due to the process, such as increasing fluidity, spraying process, etc., add small amounts gradually and stir thoroughly. Do not add too much at one time.
c. Please use special diluents and do not mix them to cause performance changes.