Pricing Tiers: Enjoy flexible pricing based on your purchase quantity. For orders between 100 and 499 grams, each gram is priced at $1.50. For larger orders of 500 to 999 grams, take advantage of a reduced price of $1.45 per gram. For bulk purchases of 1000 grams or more, benefit from an exclusive rate of $1.40 per gram. Note: One color variation is available to suit your diverse needs.
|
|
|
|
|
|
|
|
|
|
|
|
Square resistance(mΩ/sq/mil)
|
|
|
|
|
Shipping solutions for the selected quantity are currently unavailable: We're dedicated to providing you with the best service. Please contact our support team for assistance with your shipping needs.
Protections for this product: Secure payments, guaranteed. Every transaction on is fortified with robust SSL encryption and PCI DSS protocols, ensuring your peace of mind. Enjoy an effortless return and refund policy, with free local returns for qualifying defects. safeguards all your orders, ensuring a worry-free purchasing experience.
Foshan Longxin New Material Co., Ltd.
Q: How many days is the price valid for?
A: The price is valid for one day due to daily fluctuations in silver price. Please consult the salesperson for the exact price.
Q: How should the conductive paste be stored?
A: a. Short-term storage. Seal and place at room temperature within 3-5 days.
b. For long-term storage, sintering slurry (sintering temperature above 400°C) can be stored at room temperature below 25°C, and stored in a refrigerator when the room temperature is higher than 25°C.
c. Quick-drying slurry and low-temperature curing slurry (below 200°C) can be stored in a refrigerator at 5~15°C.
d. Regardless of any type of slurry, remember to seal it during storage.
Q: What are the precautions before using conductive paste?
A: a. Take it out half a day in advance to warm it up or preheat it in a ventilated oven at 25~30°C for 20 minutes.
b. Do not open it before it returns to room temperature to prevent water vapor from cooling into the paste.
Q: What should be paid attention to when using the conductive paste?
A: a. Make sure the paste is consistent with the ambient temperature.
b. Stir it thoroughly before use to restore the performance of the paste.
Q: Do we need to add diluent when using conductive paste?
A: a. Generally, the viscosity of the paste is adjusted before leaving the factory, so it can be used directly after fully stirring without adding diluent.
b. If it is necessary to add due to the process, such as increasing fluidity, spraying process, etc., add small amounts gradually and stir thoroughly. Do not add too much at one time.
c. Please use special diluents and do not mix them to cause performance changes.
Audited Supplier 
){kind=link}